1. The surface must be sufficiently cured. (at 20°C, over 30 days)

2. Completely remove laitance, dust, oil, and other contaminants from the surface. (pH 7~9, moisture content 10% or less)

3. After checking that the base coat (primer) is completely dry, apply it in one direction using a brush or roller.

4. Do not apply a thick layer of paint during the first application, but apply it twice to maximize the effect of shingle care.

5. After the first application is completed, check that the application surface is dry and that there are no pinholes, and then apply the second application.

6. The second application is done in the opposite direction to the first application.

1. When painting, apply to the surface so that it is sufficiently absorbed.

2. Apply evenly to prevent partial thickening.

3. If more than 2 days have passed since the base coat (primer) was applied or if it is raining, apply an additional base coat (0.2 kg/m²) thinly after sand papering to strengthen the adhesion between layers with the middle coat.

1. Protect the application surface by controlling traffic and walking with reference to the perfect drying time.

2. When working indoors, ventilate and dry sufficiently.

3. Defects due to poor workmanship are repaired by cutting out the appropriate part and using the same construction method as above.

1. Be sure to use the undiluted solution.

2. Be sure to store at room temperature above 5°C.

3. If it gets on your skin, wash thoroughly with soapy water.

4. Keep out of reach of children.

· 18Liter/pail